Mold Removal in Huntersville, North Carolina
Huntersville, North Carolina Crawl Space Mold Removal
Huntersville, North Carolina is the home to some of North Carolina’s top tourist destinations, including Carolina Renaissance Festival, Carolina Raptor Center, and Cowan’s Ford Wildlife Refuge. Huntersville was rated on of the best places to live in North Carolina. A problem that homeowners in Huntersville, NC have to deal with is mold. If your home is subjected to leaks and mold, our professionals can assist with your mold removal needs in Huntersville, North Carolina.
Mold Removal from Bathroom
When trying to clean up the mold, you should take special precautions. You want to not only avoid contaminating the rest of the house but also protect yourself from breathing high concentrations of spores.
Wearing protective gear and ensure that the bathroom is well ventilated are the first steps when preparing to remove the mold.
When mold removal from the bathroom is required, use an mold removal cleaner and a sponge or cloth to wipe mold off of non-porous surfaces like tile and porcelain. Follow up with a scrub brush on any stubborn areas, and thoroughly rinse with water.
To remove the black stains that mold leaves on non-porous surfaces like grout, mix equal parts of bleach and water in a spray bottle and spray it over the stained area, allowing it to sit for several minutes. Return and spray the area again, and use a scrub brush to scrub out any remaining discoloration.
Causes of Mold
1. Leaking Roofs and Pipes
Water leaks from pipes are a common cause of mold growth. The worst leaks are the ones that go undetected because they are hidden out of view, like inside a wall. By the time you discover these leaks mold has usually started to grow already.
Like some leaking pipes, a roof that leaks into the attic might not be discovered until it’s already lead to mold growth.
The best thing to do is to check the attic regularly for leaks and keep an eye on the ceiling below the attic. If you notice any signs of water damage on the ceiling or any mold that has grown through then you probably have a leaking roof.
If the weather’s been very humid for a few days in a row you might notice mold starting to grow in your home. When it rains for several days it’s especially common to see mold start to grow on walls, benches and other surfaces because of the wet air.
Also when moisture inside your house evaporates into the air it increases the humidity indoors. If your home isn’t well ventilated then the humidity will stay high for a long time.
It is almost inevitable that some mold problems will develop after your home has been affected by flooding. Obviously your house will be very wet for a long time during a flood, taking days or even weeks to dry out. Since mold only needs a suitable surface to be wet for 24 hours before it can grow this means there is a huge risk of mold growth.
4. Poor Ventilation
If your home is poorly ventilated it can create pockets of stagnant moist air which mold thrives in. Steam and water evaporating into the air creates humidity inside which then needs to be circulated outdoors through windows to keep the moisture level balanced.
Poor ventilation can also lead to wet surfaces that dry out slowly. Good ventilation is important in rooms like the bathroom and the kitchen where there is a lot of steam where mold can grow easier.
Mold Removal Process
Molds has the ability to grow in many different areas of your home, and can come in a wide range of colors and sizes.
The first step in the mold removal is the professionals will come and assess the extend of the mold issue. This inspection will also help to spot any unknown mold within your home. Our experts have various techniques to detecting mold and hidden water sources.
The next step after the assessment is the mold removal professionals will contain the areas of mold by placing protective coverings around everything to try to prevent it from spreading during the removal process. They will also turn off all fans and the heating and cooling systems.
The initial step in the removal process is to spray the area that contains the mold with a biocide. Biocide is an EPA-approved liquid which kills mold.
After waiting for the biocide to dry, the workers will then spray the area with a type of paint or whitewash that encapsulates the remaining mold spores. The mold remediation experts will spray beyond the moldy area to ensure that no more mold grows.
It is best to be proactive when it comes to mold because if your mold issue goes untreated for a long time, than additional costs could be added to help fix the damages caused by the wider mold growth. This can include damages to the drywall, sub-flooring or the siding.
About Fresh Air Technologies
If you are looking for stellar mold removal, The Fresh Air Companies’ experts certainly fit the bill. Be sure to call us to receive your free estimate today. We devote as much as time as is necessary to complete mold removal in your home in Huntersville, North Carolina. Our expert team is eager to help you as they have with their clients since being in business. Contact us for mold removal services today.